Smart Radio SR162 AIS Receiver - Modem cable, the unit, power cable, instructions.
Serial port for the connection to computer, A/B led which flashes red and green all the time showing the two channels it is checking. Data led which flashes frequently to show data is received and sent to computer.
DC connector. The unit requires 9-15v DC and uses 1.5w. The power pack is not included. Any wall wart power supply that is not being used and supplies this voltage is probably ok. BNC connector for the VHF antenna. RG312/U connected to a BNC is never going to be pretty.
Power cable with 0.5A fuse.
Power and Antenna connected. Serial cable connected to PC.
